I took the Netgear WG111 V2 back to Fry's tonight. While I was standing in line I was talking to a guy about the network adapter and how I needed the older version. He said I should check out PC Club. On a whim I stopped at Best Buy on my way home to see if they had the WG111 V1. I went to the wall where they have all their networking gear and looked. I found a few adapters made by Netgear that looked a lot like it and then down on the bottom shelf I found the one I was looking for. I was surprised by how many they had, at least 20 or so. There's even a sticker on the box that says "TiVo Compatable". Note to Best Buy; put some of those wifi adapters on the shelf next to the TiVos! I would have bought it the same day I bought the TiVo if they had done that!

Anyway, I got it home, plugged it in and it worked right off the bat. I'm a little disappointed that it doesn't support WPA. I had just got everything on my network configured with WPA recently and now I had to go back to 128 bit WEP!

Well, my Tivo is all updated and it looks like my Netgear WG111 V2 does not work. So, back to Fry's it goes

Well, I finally did it. I went out this past weekend and bought a Tivo. I have been talking about building either a MythTV box or a Windows MediaCenter box for quite a while now. I finally decided to just spend the $200 and get an 80 hour Tivo Series 2 instead. A lot cheaper than building a PC and it really does what I want anyway. Record TV, display photos and play MP3s. I had a gift card from Best Buy, so I bought it there. I originally bought a Linksys  USB200M 10/100 ethernet adapter. It worked fine, but my network setup didn't seem to work right. I have a Linksys WRT54G in my computer room. I tried putting my old Linksys BEFSR41 router in my entertainment center and I plugged in a Linksys WET11 (802.11b/Ethernet bridge) into the WAN port. I assigned a different subnet to this network. The Tivo was able to connect to the Tivo service through the network, but it was unable to see my PC running the Tivo desktop software. When I just plug the wireless bridge into the USB ethernet adapter it works fine and detects the music and photos I shared on my desktop. So, I decided to take the ethernet adapter back and get a Netgear WG111. It is a USB 802.11g adapter. My Tivo is still running the 5.3 version of the software. I requested an update to 7.1 and I am still waiting for it. Unfortunately, since I took back the USB ethernet adapter, I have to use the phone line to contact the Tivo service. I don't have a phone jack near the Tivo, so I have been stringing a phone cable across the room at night and then unplugging it in the morning. Hopefully the 7.1 update will happen soon! One issue though is that Tivo says only the WG111 V1 will work, but I have a WG111 V2. I read some posts on different blogs that some people have had luck using the V2. I'm crossing my fingers!